This item is similar to the wall type but is intended for use in laboratories where wall space is limited. At thick plywood piece of thickness 12 mm having substantial metal stand with 2 set of z-pulley and 3set of (50*5gm) slotted weights
One meter long seasoned evenly top with engine divided scale in mms on heavy supports. 4metal base sliders include 4metal accessories. Out of four sliders two sliders are provided with transverse slow motion arrangement.
Square Rod Type (Single rod): With heavy cast iron stands fitted with leveling screws. The square rod is 18 mm size & deeply graduated in mms. It is supplied with four sliders. Two of the sliders are provided with lateral motion. Complete with two lean holders & two index pins.
Double bar type 1 meter long with 4 metallic sliders two lens holders and two needles:
Same As above but the rods are supplied 1&1/2 meter long.
One meter long consists of two steel rods C.P. with cast iron provided with four metal riders two of sliders have transferees motion with two lens holder & needle.
1&1/2meter long consists of two steel, rods C.P.with cast iron provided with four metal riders two of the sliders have transferees motion with two lens holder & two needles.
One meter long consists of two rods on heavy sliders; two sliders have liter motion with two lens holder & two needles.
1&1/2 meter long consists of two rods on heavy cast iron feets with leveling screws with four heavy riders two sliders have liter motion with lens holder &two needless.
For advance research work consists of two rods supported by heavy cast iron feet, provided with 4metal riders and 4 accessories. Two of the sliders have transverse motion and one rod is engraved in mms. Improved design one meter long.
Specifications are same as above but the rods are supplied with 1&1/2 meter length.
Consisting of two steel rods of 1” diameter supported on a heavy cast iron feet provided with leveling screws, one rod is graduated in millimeters. Heavy metal sliders each take 12.5mm diameter stem, index mark attached to each slider. With third supporting rod. Complete with two-lens holders spring type and centering pin. NOTE: This bench is supplied only in 1&1/2 meter length.
In metal framed.
In bakelite framed.
Metallic nicely finished for mirror and lenses pay type heavy pattern.
Spring Action Brass.
All metal on adjustable metal stand.
Consisting of a cycle rubber tube of about one meter length with a small pointer on a heavy cast iron stand.
The brass wheel is 7.5cm dia and 3cm at its rim, carefully balanced and all the three pairs of pivots are adjustable. Complete fitted on metal base.